Prospects in India are able to take the “Photo voltaic plunge” now. They’re in a great place to analysis, learn and inquire about photo voltaic panels with the assistance of all the data obtainable on the web. As soon as they’re satisfied, they’re able to shell out the required quantity on shopping for a photo voltaic panel. Nonetheless, in all this analysis they fully neglect in regards to the mounting construction. A mounting construction is the stable basis or base of a photo voltaic system which helps the photo voltaic panel, identical to the trunk of a tree. If the bottom shouldn’t be sturdy, the entire system will falter.
Typically it’s seen {that a} purchaser is able to buy a photo voltaic panel, however is reluctant to spend just a few further bucks on shopping for a mounting construction. He thinks it’s straightforward to get it comprised of an area blacksmith, simply because it seems like a simple piece of metallic fabrication. However it’s not all the time the case. On this information, we are going to study the advantages of shopping for a mounting construction from the photo voltaic firm itself and the step-by-step set up information.
What are the components to contemplate earlier than putting in your mounting construction?
1. Angle
The Photo voltaic panel tilt angle (the angle between the horizontal floor and the photo voltaic module) must be determined in keeping with the latitude of your location anyplace on the earth. It’s usually believed that the modules positioned at a tilt angle equal to the latitude of the place, would generate the utmost vitality output. You can even use a photo voltaic tracker to extend the conversion effectivity. You can even use the app Angle Professional to examine the angular route of your set up.
2. Course
The efficiency of the photo voltaic panels relies upon upon the route wherein these panels are positioned. The very best route to face photo voltaic panels is south, since right here they obtain the utmost daylight. East and West instructions additionally work effectively. North is the one route that we should always not wish to put our panels on.
3. Location
Totally different places on the map obtain completely different quantity of daylight. It’s due to this fact, vital to examine your latitudinal and longitudinal location earlier than the set up. You can even use the Maps of India app to examine your location.Listed here are the latitudes of main cities in India –
States –
Zone -1: J&Okay, Punjab, Himachal Pradesh, Uttarakhand – 30-360
Zone – 2: Rajasthan, UP, Delhi, Haryana, Bihar, North EASTERN STATES – 24-300
Zone – 3: Gujarat, MP, Jharkhand, West Bengal, Maharashtra, Chhattisgarh, Orissa – 18-240
Zone – 4: Karnataka, Tamil Nadu, AP, Telengana, Kerala – 12-180
4. Shadow Space
Test for any shadow space, tree shade, obstacles, and many others to keep away from earlier than putting in your mounting construction and maximizing the functioning of the photo voltaic panel.
5. Floor of set up – Be certain that the floor of set up is sturdy and clean to resist the burden of the entire system.
Execs of Shopping for a Photo voltaic Panel Mounting Construction from a Photo voltaic Panel Provider
Whereas a mounting construction seems like only a metal framework, it includes sure technicalities which solely a producer of photo voltaic panel will perceive and incorporate. Until, you might be an professional in learning the entire construction and dealing of a photo voltaic panel and directing the blacksmith likewise, you will be unable to efficiently make one.
i) Understanding the construction of the stand – A blacksmith shouldn’t be in a great place to know the positioning of holes and top of legs of the mounting construction. A photo voltaic firm alternatively, can customise a stand in accordance with the photo voltaic pane necessities.
ii) Totally different panels want completely different stands – A photo voltaic panel firm is aware of the specs of a photo voltaic panels and as such can customise the peak, weight and size of the mounting construction accordingly, which a blacksmith can be incapable of reaching.
iii) Set up together with buy – If you are going to buy a mounting construction from a photo voltaic panel firm itself, it would give you the set up service as effectively. Will probably be the duty of the corporate’s consultant to verify the set up of the mounting construction and the panel atop is secure and safe. He may even check it for you, earlier than leaving your home.
iv) Session – An organization’s consultant can be higher positioned to information the client with the world of set up as he possesses the required data to determine in regards to the latitudinal and longitudinal place, in addition to examine for the shadow space. He’ll ensure that to put in the construction at a selected place, from the place the client will be capable to extract the utmost good thing about his photo voltaic panels.
Single Panel Set up Information – 120 & 180 W Panel
Right here, we’re putting in a single panel 120W photo voltaic panel with single panel photo voltaic stand. Let’s know step-by-step information:
Step -1: Small Legs (Entrance Legs)
With a view to set up the panels on the mounting construction, step one is to put in the stand securely and screw within the fixtures tightly on the bottom.
Step 2: Channels
The following step is so as to add the lengthy channels alongside the stand/ legs of the mounting construction.
Step 3: Match Small Legs and Channel Holes
The holes within the channels ought to match those on the legs with a purpose to get to the right place.
Step 4: Insert Nut and Bolt Each Holes
As soon as they’re in line, insert nuts and bolts via each the holes.
Step 5: Tight Channels with Key
The following step is to tighten the screws with a key.
Step 6: Now mount the panels
As soon as the channel is correctly on the stand, you possibly can mount the photo voltaic panel.
Step 7: Safe connections
Tighten the photo voltaic panels and legs of mounting construction with nut and bolts utilizing a key.
Step 8: Tight Photo voltaic Panel utilizing Nut & Bolts
Screw it correctly and examine for any unfastened connections.
Step 9: Now, Photo voltaic Panel has been mounted on the stand
Step 10: Repair Panel Legs utilizing Bricks or Dalda Cane or Civil Work
To safe the entire stand, place bricks, or giant cans or cement slabs across the legs of the mounting construction.
Our Merchandise
Listed here are just a few of Loom Photo voltaic’s hottest promoting Mounting Buildings:
i) Loom Photo voltaic 1 Panel Stand (40-180 Watts)
This moveable stand is appropriate for mounting one photo voltaic panel of any model ranging in between 40 W and 180 W. It may be comfortably put in on the rooftop of your house. Product of galvanized iron, this stand is rust proof, has a lifetime of greater than 25 years and one yr of guarantee. This stand weighs 5 kg and is 9.8 toes lengthy and 4.4 toes huge with an angle of 25 levels.
ii) Loom Photo voltaic 2 Panel Stand (100-180 Watts)
This moveable stand is appropriate for mounting two photo voltaic panels of any model ranging in between 100 W and 180 W. It may be comfortably put in on the rooftop of your house. Product of galvanized iron, this stand is rust proof, has a lifetime of greater than 25 years and one yr of guarantee. This stand weighs 15 kg and is 9.8 toes lengthy and 4.4 toes huge with an angle of 25 levels.
iii) Loom Photo voltaic 1 Panel Stand (340 Watts)
This moveable stand is appropriate for mounting one photo voltaic panel of any model ranging in between 320 W and 360 W. It may be comfortably put in on the rooftop of your house. Product of galvanized iron, this stand is rust proof, has a lifetime of greater than 25 years and one yr of guarantee. This stand weighs 5 kg and is 9.8 toes lengthy and 4.4 toes huge with an angle of 25 levels.
iv) Loom Photo voltaic 2 Panels Stand (320-360 Watts) or 3 Panels Stand (100-180 Watts)
This moveable stand is appropriate for mounting two photo voltaic panels of any model ranging in between 320 W and 360 W or three photo voltaic panels of any model ranging in between 100 W – 180 W. It may be comfortably put in on the rooftop of your house. Product of galvanized iron, this stand is rust proof, has a lifetime of greater than 25 years and one yr of guarantee. This stand weighs 8 kg and is 13 toes lengthy and 6.5 toes huge with an angle of 25 levels.
Photo voltaic Stand Set up Video
Let’s watch step-by-step photo voltaic panel set up video for two panels.